Need 300 RUM & 180 AccuBond Loads

Discussion in 'Reloading' started by JohnW, Jan 26, 2008.

  1. JohnW

    JohnW Member

    Messages:
    5
    Joined:
    Jun 2, 2007
    I have RL 25 , Retumbo & IMR 4350 powders and want to load some 180gr AccuBonds for my Rem XCR in 300 RUM. Anyone have load data with components I have on hand that work well thanks?
     
  2. D.Camilleri

    D.Camilleri Well-Known Member

    Messages:
    774
    Joined:
    Jun 1, 2004
    I am shooting 90 gr of Rel 22 with the 180 accubond. 3250 and about .5 moa. Gun shot so good with this load that I stopped load development.
     

  3. ingotoutdoors

    ingotoutdoors Active Member

    Messages:
    43
    Joined:
    Jan 29, 2008
    i agree RL 22, but i'm using 89 grains with the accubond. OAL=3.671 and a fed 215. shoots .5 minute and holds true all the way out.
     
  4. 300Rumbum

    300Rumbum Member

    Messages:
    15
    Joined:
    Nov 16, 2005
    96.0 grains of RE25 has worked for me and my buddies with Remington 700 Senderos. We all use the 180 Accubond. FED 215m primers as well. Work up slowly. This is a hot load. We usually find good groups in the 94-96 grain range.
     
  5. JohnW

    JohnW Member

    Messages:
    5
    Joined:
    Jun 2, 2007
    Thanks for the info. I have used 96.5gr RL 25 with 180gr Gamekings but this is my first try with Accubonds I'll work it up and give it a try.If RL22 works that well I may have to try it to.