Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
neck turning
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="J E Custom" data-source="post: 600727" data-attributes="member: 2736"><p>The only thing I can say Is that it makes your loads more consistant shot to shot if the loads are </p><p>well tested and prepared.</p><p></p><p>If you are shooting targets from 100 to 300 yards it will be hard to see any improvement,</p><p></p><p>But if you have a good chronograph you can see the difference in SDs and ES.</p><p></p><p>If you mic. a case neck wall you will find a difference from one side to the other, This effects </p><p>sizing and bullet tension. When you size a case with different neck wall thicknesses it moves </p><p>the bullet off center by the difference when using standard dies.</p><p></p><p>I like to turn all case necks on new brass before the first firing just enough to clean them up and </p><p>then size them for loading. </p><p></p><p>I know its a pain but if you are looking for the most accuracy from your rifle at long range it is </p><p>just one of the many things required.</p><p></p><p>J E CUSTOM</p></blockquote><p></p>
[QUOTE="J E Custom, post: 600727, member: 2736"] The only thing I can say Is that it makes your loads more consistant shot to shot if the loads are well tested and prepared. If you are shooting targets from 100 to 300 yards it will be hard to see any improvement, But if you have a good chronograph you can see the difference in SDs and ES. If you mic. a case neck wall you will find a difference from one side to the other, This effects sizing and bullet tension. When you size a case with different neck wall thicknesses it moves the bullet off center by the difference when using standard dies. I like to turn all case necks on new brass before the first firing just enough to clean them up and then size them for loading. I know its a pain but if you are looking for the most accuracy from your rifle at long range it is just one of the many things required. J E CUSTOM [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
neck turning
Top