Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Neck turn newb
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="dkhunt14" data-source="post: 998685" data-attributes="member: 14053"><p>My questions are as follows:</p><p></p><p>1. With a Standard chamber will neck turning my brass Help or hurt? Claims I have read Is that it already is too lose a chamber that it will hurt accuracy?</p><p></p><p>2. I see Neck Reamers/ Outside neck turning? One or the other or both?</p><p></p><p> With a standard chamber you can skim them and it might help a little. When you neck turn it makes the bullet more centered and makes the brass more consistent. You really should get a tight necked gun for full benefits. Neck turning is way more accurate then reaming, I can hold .0001 in turning. If you are going to do it get a K&M and the expander mandrel with the holder. K&M is one of the easiest to adjust. You should also have a ball micrometer to measure the wall thickness. K&M also has one with the spindle ground specially so you can measure right up to the neck shoulder junction. If you are just skimming you can get away without it. Matt</p></blockquote><p></p>
[QUOTE="dkhunt14, post: 998685, member: 14053"] My questions are as follows: 1. With a Standard chamber will neck turning my brass Help or hurt? Claims I have read Is that it already is too lose a chamber that it will hurt accuracy? 2. I see Neck Reamers/ Outside neck turning? One or the other or both? With a standard chamber you can skim them and it might help a little. When you neck turn it makes the bullet more centered and makes the brass more consistent. You really should get a tight necked gun for full benefits. Neck turning is way more accurate then reaming, I can hold .0001 in turning. If you are going to do it get a K&M and the expander mandrel with the holder. K&M is one of the easiest to adjust. You should also have a ball micrometer to measure the wall thickness. K&M also has one with the spindle ground specially so you can measure right up to the neck shoulder junction. If you are just skimming you can get away without it. Matt [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Neck turn newb
Top