Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Neck tension trouble, 6.5x284
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="DANTEC" data-source="post: 28445" data-attributes="member: 685"><p>to try to avoid your neck junction , perhaps try to use a full sizer set just 0.002 under your chamber headspace ( to allow easy chambering </p><p>BUT </p><p>with a radius junction between neck and shoulder slighty bigger than the chamber radius big problem with regular die ( not custom design for BR ) they are made with two reamers one for the body and the shoulder , one for the neck so you get a sharp angle between neck and shoulder and you put stress in brass material a lot with a radius you sucess to bump your shoulderand size neck .</p><p></p><p>you can use a full sizer as it with bushing to set the neck sizing you want </p><p></p><p>on short neck case best is to resize up to 90% of the neck to get a longer aera long enought to avoid of center bullet and use a cocentric chamfer close the boatail angle to doesn t use the bullet as neck sizer mandrel .</p><p></p><p>good shooting</p><p></p><p>DAN TEC</p></blockquote><p></p>
[QUOTE="DANTEC, post: 28445, member: 685"] to try to avoid your neck junction , perhaps try to use a full sizer set just 0.002 under your chamber headspace ( to allow easy chambering BUT with a radius junction between neck and shoulder slighty bigger than the chamber radius big problem with regular die ( not custom design for BR ) they are made with two reamers one for the body and the shoulder , one for the neck so you get a sharp angle between neck and shoulder and you put stress in brass material a lot with a radius you sucess to bump your shoulderand size neck . you can use a full sizer as it with bushing to set the neck sizing you want on short neck case best is to resize up to 90% of the neck to get a longer aera long enought to avoid of center bullet and use a cocentric chamfer close the boatail angle to doesn t use the bullet as neck sizer mandrel . good shooting DAN TEC [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Neck tension trouble, 6.5x284
Top