A friend gifted me a pound of it. Any experience with it? Load data for what cartridge?
In my 30-06 with 215s I start to see pressure signs 1gr earlier with N555 than H4350 and the velocity was the same for both powders.Thinking about running it on 30-06 with 166 HH or 175 TMK
Just beginning to work up a good all temperature load for a 30 Nosler and 180 gr Hammer Hunters. I got 3220 ft/sec with N555 at 95% load density with no pressure signs. Still doing the preliminary work with N555 along with N565, RL-23, and H4832sc.
Peterson brass, F215M primers, -0.050 off lands as a starting point, 24" barrel.
Thank you for that. Saved, printed, and in my reloading binder.Chart I made from Quick Loads burn factors. Not all powders but ones that are used mostly.