Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
More 338 EDGE advice please
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="orwapitihunter" data-source="post: 702073" data-attributes="member: 1939"><p>Brambles</p><p>With a little tweaking you will be able to load the CFE9 from the top.</p><p>It will never be as easy as the staggered box, as you have to force the round between the feed lips. The wider the gap, the easier they go in but too wide and they will pop back out from the spring pressure. It helps if you roll the cartridge as you press down.</p><p>The downside of the CFE9 to me is the length of the follower and the size of the opening that can be achieved with BDL bottom metal. There is a bit of a compromise compared to the factory set up.</p></blockquote><p></p>
[QUOTE="orwapitihunter, post: 702073, member: 1939"] Brambles With a little tweaking you will be able to load the CFE9 from the top. It will never be as easy as the staggered box, as you have to force the round between the feed lips. The wider the gap, the easier they go in but too wide and they will pop back out from the spring pressure. It helps if you roll the cartridge as you press down. The downside of the CFE9 to me is the length of the follower and the size of the opening that can be achieved with BDL bottom metal. There is a bit of a compromise compared to the factory set up. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
More 338 EDGE advice please
Top