manners t-4a bottom metal

Discussion in 'Long Range Hunting & Shooting' started by rscott5028, Jun 8, 2011.

  1. rscott5028

    rscott5028 Well-Known Member

    Messages:
    2,608
    Joined:
    Apr 18, 2010
    I'm building a 6br using a Stiller TAC-30 and Bartlein 1:8 twist x28" barrel on a Manners T-4A stock.

    The stock is inletted for BDL bottom metal.

    It seems like there are plenty of options. But, does anyone have specific recommendations or experience as to bottom metal to make this a decent repeater?

    It'll mostly be used on paper and steel at 500yds. But, it may be used for some varmint hunting.

    A detachable magazine would be nice, but isn't a specific requirement.

    thanks,
    Richard
     
  2. ICANHITHIMMAN

    ICANHITHIMMAN Well-Known Member

    Messages:
    4,380
    Joined:
    Jan 31, 2008
    Stiller are Rem 700 clones right? If thants the case try 308 nate, Seekins, CDI, or Badger ord for detachable mag systems. Why not look at paciffic tool for bottom metal
     

  3. rscott5028

    rscott5028 Well-Known Member

    Messages:
    2,608
    Joined:
    Apr 18, 2010
    Yes. It's a 700 clone.

    Pacific Tool looks good. That's where the reamer, bushings, etc came from anyway.

    But, if someone was able to recommend a specific DM system that works really well (especially with 6br ...not sure if it's more or less prone to feeding issues) then, I would take a closer look.

    I'll check out the ones you listed.

    thanks!!
    richard