Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
making my own pillars
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="J E Custom" data-source="post: 291288" data-attributes="member: 2736"><p>Jordan. </p><p></p><p>Aluminum arrow shafts are to thin, But if you can drill a straight hole you can get a piece of</p><p>1/2'' aluminum round stock drill the stock with a 1/2" drill and then cut the Pillars to length , Then drill a 5/16"or larger hole in the round bar pieces and rough up the outside to help the</p><p> Epoxy grip the aluminum.</p><p></p><p>After making the pillars apply the epoxy to the stock and the pillar and install by twisting them </p><p>into place.</p><p></p><p>Be sure and tape the stock in the area your working to prevent epoxy from ruining the finish.</p><p></p><p>Pillars should be installed before bedding so after the pillars are installed skim bedding will</p><p>be nessary.</p><p></p><p>J E CUSTOM</p></blockquote><p></p>
[QUOTE="J E Custom, post: 291288, member: 2736"] Jordan. Aluminum arrow shafts are to thin, But if you can drill a straight hole you can get a piece of 1/2'' aluminum round stock drill the stock with a 1/2" drill and then cut the Pillars to length , Then drill a 5/16"or larger hole in the round bar pieces and rough up the outside to help the Epoxy grip the aluminum. After making the pillars apply the epoxy to the stock and the pillar and install by twisting them into place. Be sure and tape the stock in the area your working to prevent epoxy from ruining the finish. Pillars should be installed before bedding so after the pillars are installed skim bedding will be nessary. J E CUSTOM [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
making my own pillars
Top