magwell scratching brass

Discussion in 'Gunsmithing' started by 1denogean, Sep 9, 2013.

  1. 1denogean

    1denogean Well-Known Member

    Messages:
    56
    Joined:
    Aug 22, 2012
    i have a rem 700 adl and everytime i load a round it scratches my brass on the right side where the bullet loads from. on the body all the way to the rim of the brass i can see it happen now thats how i know where its from, whats an easy fix for this?

    all help is apreciated thanks
     
  2. 1denogean

    1denogean Well-Known Member

    Messages:
    56
    Joined:
    Aug 22, 2012
    anyone?
     

  3. 1denogean

    1denogean Well-Known Member

    Messages:
    56
    Joined:
    Aug 22, 2012
    Tttttttttt
     
  4. coyotekiller82

    coyotekiller82 Well-Known Member

    Messages:
    95
    Joined:
    Jul 20, 2009
    I'd use some emery cloth or a small file to file down the rough spot that is scratching your cases during loading.
     
  5. 1denogean

    1denogean Well-Known Member

    Messages:
    56
    Joined:
    Aug 22, 2012
    thanks i have had at it for a while with a small file hoping it would help looks like this is gonna take some time
     
  6. Hired Gun

    Hired Gun Well-Known Member

    Messages:
    1,537
    Joined:
    Apr 21, 2003
    It doesn't take much. A little wet dry 320 on a popsicle stick to break the edge then polish with 400.
     
  7. Woody26

    Woody26 Well-Known Member

    Messages:
    134
    Joined:
    Feb 10, 2012
    Just tagging in as I have the same problem in a sendero sfii.
     
  8. 1denogean

    1denogean Well-Known Member

    Messages:
    56
    Joined:
    Aug 22, 2012
    i have never had this many problems with a remington 700 took it to a gunsmith and he got most of it out still shows a little scratch but not nearly what it was befor