loads for 270 WSM

Discussion in 'Reloading' started by DCGS, Oct 3, 2011.

  1. DCGS

    DCGS <strong>Official LRH SPONSOR</strong>

    Messages:
    491
    Joined:
    Dec 5, 2007
    I know this has been covered before but lets here your pet loads for the 270 WSM. It seems that the IMR 4350 is a good choice but has anyone tried H 4350. Thanks for the help. Dan
     
  2. winmag

    winmag Well-Known Member

    Messages:
    2,528
    Joined:
    Dec 23, 2009
    62 gr of RL-19 under a 140 gr Nos Accubond with a Fed 215 primer.
    My dads rifle likes 61gr
    My cousins likes RL-19 also. 61-64 gr seems to work great in most in the ones I load for.
    All 3 are Win Model 70's. Two fearherweights, & one Coyote. All shoot sub mos with my .683" 5 shot group being the largest. @ 100.
    We LOVE this combo.

    Also got IMR 4831 to work great with 150 gr SST's in both featherweights, but we all 3 setteled on the Accubond. Hey, Nosler is right down the road from my house:D
     

  3. highcotton

    highcotton Member

    Messages:
    16
    Joined:
    Oct 22, 2008
    CCI 200 primer, WIN brass, 60.5 gr IMR 4350, 140 NBT
     
  4. bigngreen

    bigngreen Well-Known Member

    Messages:
    5,812
    Joined:
    Nov 24, 2008
    I like 66gr Retumbo for 165gr Matrix, 68gr of Retumbo with 150's, 71 gr Retumbo with 140's and R17 with 110 gr bullets. Haven't seen much point in 130's so haven't loaded enough to have a load for them, all loads with Fed 215's. Most of the loads are middle of the road to spicy :D I've found 4350 shot well just didn't give me much over a 270 Win and that just won't work, Magpro was the best for velocity but I've never been able to hit an accuracy node with low ES with it. Retumbo give me velocity and very low ES.