LOAD HELP! 6mm Remington 95gr Berger or Sierra MK

[firstlight]

I'm looking for some help with a load for my Remington 700 HB 24". Data for these bullets is pretty slim. I also know that what works for one may not work for me but it could be a close place to start. I'm guessing the factory twist is 1:9 1/4
I'm interested in the 95 Sierra MK but seems I can only get the 95 Berger's locally.
I would like to use either H414 or preferably H4350.

Thanks in advance for any help,

 

[Idaho Trecker]

I dont have any personal experience with the standard 6mm but here is what the Hodgdon site states. It is for a 95 grain nosler bt but should give you a good starting point.

Case: Winchester
Twist: 1:9"
Primer: Remington 9 1/2, Large Rifle
Barrel Length: 24"
Trim Length: 2.223"

H4350 starting 41.0gr @2909fps Max 45.5gr @3167fps
H414 starting 40.0gr @2847 fps Max 44.5gr @3164fps
Hybrid 100V starting 41.0gr @2930fps Max 45.4gr@3226fps

I run a 6mm ackley with 95 berger vld and have not had very good luck with H414 and have not used H4350.

However I have had good luck with 95 berger classic hunter.

I've had the best luck with both bullets using Hybrid 100V for speed and accuracy.

Good luck hope this helps some

 

[firstlight]

Idaho Tracker,

I should have also stated that I would like to achieve 3150fps+ velocity.
I am not familiar with the 100V.

Thank you for your input. I always prefer to have others give me what has worked well for them and then compare it to the manual and go from there.

Thanks again,

 

[Idaho Trecker]

I would recommend trying 100 V if you can. It has worked well in my 6ackley and my friends 243 with the 95 classic hunter. Both guns push the 95 100fps+ faster than published velocity and both of us are shooting 22.5 inch barrels from tikka and sako.