Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Load data for 300 PRC
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Sdvldog1371" data-source="post: 1687826" data-attributes="member: 110800"><p>Running a 24" 1:9 with :</p><p>78 grains h1000 I was at pressure with Fed 215M primers at averaging 2887 fps.</p><p>78 grains h1000 CCI 200 no pressure at 2865 fps</p><p></p><p></p><p></p><p>I think the factory are loaded with RL26.</p><p>I found a pretty huge swing in the factory ammo powder charges. Average was 74.5 with a 3.2 grain difference from high to low. definitely using Fed 215s from factory. Book weight for RL26 came pretty close to actual velocity. I pulled apart the last 80 of 200 and weighed each charge and messed with different charge weights. </p><p></p><p></p><p></p><p>As mentioned 78gr h1000 was pressure in my setup with .020 jump using 225 ELD-x so you may consider starting slightly lower.</p></blockquote><p></p>
[QUOTE="Sdvldog1371, post: 1687826, member: 110800"] Running a 24" 1:9 with : 78 grains h1000 I was at pressure with Fed 215M primers at averaging 2887 fps. 78 grains h1000 CCI 200 no pressure at 2865 fps I think the factory are loaded with RL26. I found a pretty huge swing in the factory ammo powder charges. Average was 74.5 with a 3.2 grain difference from high to low. definitely using Fed 215s from factory. Book weight for RL26 came pretty close to actual velocity. I pulled apart the last 80 of 200 and weighed each charge and messed with different charge weights. As mentioned 78gr h1000 was pressure in my setup with .020 jump using 225 ELD-x so you may consider starting slightly lower. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Load data for 300 PRC
Top