Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Equipment Discussions
Kestrel absolute pressure question?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="otan3lvl" data-source="post: 837920" data-attributes="member: 70528"><p>To measure the absolute pressure aka station pressure with you Kestrel 4500NV (nice choice btw) you do as you have done: you go to the Baro-screen and set Reference altitude to 0feet above sea level. When setting the reference altitude to zero you tell the Kestrel that you are at sealevel and thus prevent it from converting the absolute pressure to sea level pressure. These weather stations are mainly used for weather-stuff, and the weather geeks use pressure converted to sea level. When shooting we are interested in the absolute pressure (the actual pressure at your location). Now of course it is equally important that you zeroed in using absolute pressure.</p><p></p><p>Ok, so you were spot in with your first bit, but....the altitude menu. if you use the standard atmospheric pressure of 29.92inhg you would not get an accurate altitude reading unless the absolute pressure at sealevel actually IS 29.92inhg at that exact time. The standard atmospheric pressure is just an average reading, so the actual pressure at sealevel fluctuates with the weather. If it is sunny and warm you are in a highpressure area most likely above 29.92 and if it rains itnwould be opposite and below 29.92.</p><p></p><p></p><p>The thing is, you had just told the kestrel that you are at sealevel when setting reference altitude to zero. when you go to the altimeter menu, you are suppose to tell it what the sealevel pressure is that day, so it can calculate the difference between sealevel and your location and thus figure out your altitude. So for a correct read of the altitude you would HAVE to get the ACTUAL pressure at sea level at THAT time. You can find that online from a weather station. Of course you could get this pressure yourself from the Kestrel by going to the Baro and put in your actual altitude (but then you would already know your altitude)</p><p></p><p>So here is what I suggest:</p><p>1. Use a topographical map or your gps to find your current altitude - write down</p><p>2. Put current altitude as reference altitude in Baro screen to get mean sea level pressure - write down.</p><p>3. Set reference altitude in Baro screen back to zero to get back to absolute pressure and getting ready to shoot.</p><p>4. Go to Altimeter screen and set reference value to mean sea level pressure that you wrote down in step 2.</p><p>This way you have the right barometric pressure for shooting, and as long as there are no big changes in weather the altimeter screen will also show the correct altitude throughout your day.</p><p></p><p> step zero would be to check that Sync baro and Sync alti are set to off, you find these settings where you punch in the reference values.</p><p></p><p>I hope you understood what I meant as I feel my explanation is not one of the best. But I DO have a proper understanding of this myself so feel free to ask any followup questions <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite2" alt=";)" title="Wink ;)" loading="lazy" data-shortname=";)" /></p></blockquote><p></p>
[QUOTE="otan3lvl, post: 837920, member: 70528"] To measure the absolute pressure aka station pressure with you Kestrel 4500NV (nice choice btw) you do as you have done: you go to the Baro-screen and set Reference altitude to 0feet above sea level. When setting the reference altitude to zero you tell the Kestrel that you are at sealevel and thus prevent it from converting the absolute pressure to sea level pressure. These weather stations are mainly used for weather-stuff, and the weather geeks use pressure converted to sea level. When shooting we are interested in the absolute pressure (the actual pressure at your location). Now of course it is equally important that you zeroed in using absolute pressure. Ok, so you were spot in with your first bit, but....the altitude menu. if you use the standard atmospheric pressure of 29.92inhg you would not get an accurate altitude reading unless the absolute pressure at sealevel actually IS 29.92inhg at that exact time. The standard atmospheric pressure is just an average reading, so the actual pressure at sealevel fluctuates with the weather. If it is sunny and warm you are in a highpressure area most likely above 29.92 and if it rains itnwould be opposite and below 29.92. The thing is, you had just told the kestrel that you are at sealevel when setting reference altitude to zero. when you go to the altimeter menu, you are suppose to tell it what the sealevel pressure is that day, so it can calculate the difference between sealevel and your location and thus figure out your altitude. So for a correct read of the altitude you would HAVE to get the ACTUAL pressure at sea level at THAT time. You can find that online from a weather station. Of course you could get this pressure yourself from the Kestrel by going to the Baro and put in your actual altitude (but then you would already know your altitude) So here is what I suggest: 1. Use a topographical map or your gps to find your current altitude - write down 2. Put current altitude as reference altitude in Baro screen to get mean sea level pressure - write down. 3. Set reference altitude in Baro screen back to zero to get back to absolute pressure and getting ready to shoot. 4. Go to Altimeter screen and set reference value to mean sea level pressure that you wrote down in step 2. This way you have the right barometric pressure for shooting, and as long as there are no big changes in weather the altimeter screen will also show the correct altitude throughout your day. step zero would be to check that Sync baro and Sync alti are set to off, you find these settings where you punch in the reference values. I hope you understood what I meant as I feel my explanation is not one of the best. But I DO have a proper understanding of this myself so feel free to ask any followup questions ;) [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Equipment Discussions
Kestrel absolute pressure question?
Top