Kenton Industries - New Sponsor

Discussion in 'Sponsors Marketplace' started by Len Backus, Nov 21, 2008.

  1. Len Backus

    Len Backus Administrator Staff Member

    Messages:
    6,343
    Joined:
    May 2, 2001
    Welcome to Mark Kenton, maker of the Tuned Trajectory Compensator TM.

    I have been wanting to use one of these for years and finally got one installed last month. I took two deer with my XP handgun (Kirby Allen) at 330 and 440 yards during our WI antlerless season. It did everything I hoped. When hunting solo, it is very difficult to spot, range, chart, click, spot, range, adjust the clicks, repeat, repeat, repeat. Using Mark's ballistic drop compensating turret cap is a breeze. I'll be giving more examples during my hunts.

    Kenton Industries, Tuned Trajectory Compensator TM
     
  2. gamehauler

    gamehauler Well-Known Member

    Messages:
    228
    Joined:
    Dec 8, 2007
    Welcome Mark.
    I have talked with Mark when I was building my riffle
    and he is very informative and helpful.
    I decided to go with a Zeiss Conquest with turrets for load development
    but one I have my load developed I plan to use Marks system.

    Give him a call if you have any questions.

    Mike
     

  3. pdog06

    pdog06 Well-Known Member

    Messages:
    269
    Joined:
    Sep 27, 2008
    I've talked to Mark a few times and he is very helpful and a great guy. I currently have 2 of his knobs, and a friend of mine has 1. We use them on a few varmint guns we have and it's very easy to just range and set the turret to the yardage. Alot faster than counting clicks on prarie dogs when you are taking quick shots.

    I tested one of the knobs with my 308, every 100 yards out to 700 yards and it is dead-on with the load data I gave him.

    He makes a very quality product.
     
  4. Ernie

    Ernie SPONSOR

    Messages:
    2,842
    Joined:
    Jun 18, 2007
    Welcome Kenton Industries!
    When I had my 7.82 Patriot barrel for my XP, I had a Kenton on my 3-12 Burris LER scope-Worked great!
     
  5. Kenton Industries

    Kenton Industries Member

    Messages:
    10
    Joined:
    Jan 3, 2009
    Kenton Industries Thanks Len Backus and Board Members

    Happy New Year!

    Kenton Industries was started in 2001 committed to providing the shooting and hunting community custom bullet drop compensators for most all major riflescope models.

    We wanted to take this opportunity to say thank you for a great 2008. We look forward to providing custom bullet drop compensators for all your shooting and hunting needs in 2009.

    We have a full time technical staff that can assist you in answering any questions you may have regarding our products and their applications to your specific needs.

    We will stopping by this board as time permits to provide feedback and answer your questions as well.

    Very Kind Regards;

    Mark Kenton
    Kenton Industries LLC
    info@kentonindustries.com
     
    Last edited: May 20, 2009
  6. Crane

    Crane Well-Known Member

    Messages:
    300
    Joined:
    Nov 27, 2005
    It was nice to have someone return a phone call in a timely manner, good people over at Kenton. By the way, no luck getting a "blank" IOR knob...yet.
     
  7. Kenton Industries

    Kenton Industries Member

    Messages:
    10
    Joined:
    Jan 3, 2009
    Hello Crane;

    We are working on getting IOR blanks at the present time. We will post an update on the website as soon as they are available.

    Thanks for the Kind words.:)


    Mark Kenton
    Kenton Industries LLC
    www.kentonindustires.com
     
  8. Bero

    Bero New Member

    Messages:
    2
    Joined:
    Jul 17, 2009
    Hello to all.
    It is my first post.

    Soon, after 1-2 weeks, i will have elevation knob "K.I. Unit" for my Leupold VX-II to replace field cap.
    :)
     
  9. Ernie

    Ernie SPONSOR

    Messages:
    2,842
    Joined:
    Jun 18, 2007
    Welcome to LRH.
    Ernie