Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Initial break in is done....now what
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Greyfox" data-source="post: 1342611" data-attributes="member: 10291"><p>I have a 300WM MilSpec and have worked with a few others. I would start with 74gr of H1000, Fed 215 primer, and seat the Berger 215 @ .020" off the lands. The Hybrid design of this bullet seems to be much less sensitive, if at all to seating depth; at least with this rifle. Mine and two others produced 2750 FPS, ES<10FPS with 76 gr of H1000 and .25-.35MOA. Retumbo produces an additional 100FPS with the same accuracy and ES. Barrels were the 24" version. Brass was Norma. If this load doesn't work out you can resort to the ladder tests, etc, etc.</p></blockquote><p></p>
[QUOTE="Greyfox, post: 1342611, member: 10291"] I have a 300WM MilSpec and have worked with a few others. I would start with 74gr of H1000, Fed 215 primer, and seat the Berger 215 @ .020" off the lands. The Hybrid design of this bullet seems to be much less sensitive, if at all to seating depth; at least with this rifle. Mine and two others produced 2750 FPS, ES<10FPS with 76 gr of H1000 and .25-.35MOA. Retumbo produces an additional 100FPS with the same accuracy and ES. Barrels were the 24" version. Brass was Norma. If this load doesn't work out you can resort to the ladder tests, etc, etc. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Initial break in is done....now what
Top