Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Initial break in is done....now what
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="J E Custom" data-source="post: 1341330" data-attributes="member: 2736"><p>Lots of different ideas. And my way is different like most everyone else.</p><p></p><p>I start with mag length ammo to find the lowest SDs and ESs and also the max load. I do all of my load testing over a chronograph to establish the best powder, bullet shape and weight and primer for my rifle.</p><p></p><p>After this has been done I then mess with neck tension and seating depth</p><p>using the data that I have already established working up the best load.</p><p>Armed with this information, I start trying to get optimum accuracy by adjusting physical parameters like seating depth and neck tension.</p><p></p><p>I also clean between each group so they will be tested under the same conditions. (Shoot one group and clean). One other thing, I only make one change at a time so I can read the results with clear proof of the effect of the "One" change.</p><p></p><p>Just the way I go about working up loads. For me this method saved me many firings to reach the goal of accuracy without trial and error.</p><p></p><p>J E CUSTOM</p></blockquote><p></p>
[QUOTE="J E Custom, post: 1341330, member: 2736"] Lots of different ideas. And my way is different like most everyone else. I start with mag length ammo to find the lowest SDs and ESs and also the max load. I do all of my load testing over a chronograph to establish the best powder, bullet shape and weight and primer for my rifle. After this has been done I then mess with neck tension and seating depth using the data that I have already established working up the best load. Armed with this information, I start trying to get optimum accuracy by adjusting physical parameters like seating depth and neck tension. I also clean between each group so they will be tested under the same conditions. (Shoot one group and clean). One other thing, I only make one change at a time so I can read the results with clear proof of the effect of the "One" change. Just the way I go about working up loads. For me this method saved me many firings to reach the goal of accuracy without trial and error. J E CUSTOM [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Initial break in is done....now what
Top