Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Equipment Discussions
I need some Labradar help please
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="RockyRandy" data-source="post: 2295516" data-attributes="member: 108446"><p>My two cent worth, If you look at my (picture profile) you will see my lab radar setup. To help in my aiming before I bought a trigger I used a Bic pen with the ink tub pulled out so it was hollow and i could sight through the hole and I would tape it to the top of the unit. With a suppressor I would have it even with the barrel and the most important part is to make sure went into settings and selected without a trigger before shooting. I like many other found out it was better to use a battery pack instead of batteries especially in cold weather. If I did my part and aimed it properly I never had problems with it reading my shots. </p><p>Then I read how everyone liked the triggers so I bought one of those, and put the velcro on my barrel and it worked great AFTER i went back into settings and switch it to the trigger mod. Right off hand I can't tell you where my sensitivity settings are set at but it works great now. </p><p>I did run into a problems with a friend that brought out his 45 long colt rifle and for what ever reason it wouldn't pick-up his shots, about 3 days later I used it on my creedmore and it picked up every shot. </p><p></p><p> If it was me I would contact customer service and get some tech help but I would check all the boxes that everyone on here has mentioned first so you have good info before the call.</p><p></p><p>Good luck!!</p></blockquote><p></p>
[QUOTE="RockyRandy, post: 2295516, member: 108446"] My two cent worth, If you look at my (picture profile) you will see my lab radar setup. To help in my aiming before I bought a trigger I used a Bic pen with the ink tub pulled out so it was hollow and i could sight through the hole and I would tape it to the top of the unit. With a suppressor I would have it even with the barrel and the most important part is to make sure went into settings and selected without a trigger before shooting. I like many other found out it was better to use a battery pack instead of batteries especially in cold weather. If I did my part and aimed it properly I never had problems with it reading my shots. Then I read how everyone liked the triggers so I bought one of those, and put the velcro on my barrel and it worked great AFTER i went back into settings and switch it to the trigger mod. Right off hand I can't tell you where my sensitivity settings are set at but it works great now. I did run into a problems with a friend that brought out his 45 long colt rifle and for what ever reason it wouldn't pick-up his shots, about 3 days later I used it on my creedmore and it picked up every shot. If it was me I would contact customer service and get some tech help but I would check all the boxes that everyone on here has mentioned first so you have good info before the call. Good luck!! [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Equipment Discussions
I need some Labradar help please
Top