Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
hs precision 7wsm twist rate
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="shortgrass" data-source="post: 424298" data-attributes="member: 24284"><p>That's easy enough to check yourself. Clean the rifle as you normally would. You will need the following, a bore guide, cleaning rod with good rotating handle, patches that tightly fit the bore. Run a tight fitting patch thru the bore guide, into the rifling 4" or 5". Measure from the back of the bore guide back 8" and make a mark on <strong>top</strong> of the rod with a marker. Wrap a piece of tape around the rod if needed so you can make a mark you can see. Make another mark at 9" and another at 10". Pust the patch forward slowly and watch the cleaning rod rotate. Which ever mark comes back up, because of the rotation, is the twist rate. Or,, call H-S , have the serial number ready , they will have a record of how that rifle left their shop.</p></blockquote><p></p>
[QUOTE="shortgrass, post: 424298, member: 24284"] That's easy enough to check yourself. Clean the rifle as you normally would. You will need the following, a bore guide, cleaning rod with good rotating handle, patches that tightly fit the bore. Run a tight fitting patch thru the bore guide, into the rifling 4" or 5". Measure from the back of the bore guide back 8" and make a mark on [B]top[/B] of the rod with a marker. Wrap a piece of tape around the rod if needed so you can make a mark you can see. Make another mark at 9" and another at 10". Pust the patch forward slowly and watch the cleaning rod rotate. Which ever mark comes back up, because of the rotation, is the twist rate. Or,, call H-S , have the serial number ready , they will have a record of how that rifle left their shop. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
hs precision 7wsm twist rate
Top