Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
How much neck tension
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="BountyHunter" data-source="post: 166454" data-attributes="member: 12"><p>Nothing is wrong with the .003 neck clearance. That is not the issue and has nothing to do with the problem. </p><p> </p><p>The problem is simply either the bushing is too small or the cases are work hardened. </p><p> </p><p>Now you said a .012 neck works fine. What is the loaded round difference between the .012 and the .011 rounds loaded? You will normally need about .003 smaller neck bushing than the loaded round. Plan on .001 springback so that gives you really .002 neck tension which is the critical factor.</p><p> </p><p>BH</p></blockquote><p></p>
[QUOTE="BountyHunter, post: 166454, member: 12"] Nothing is wrong with the .003 neck clearance. That is not the issue and has nothing to do with the problem. The problem is simply either the bushing is too small or the cases are work hardened. Now you said a .012 neck works fine. What is the loaded round difference between the .012 and the .011 rounds loaded? You will normally need about .003 smaller neck bushing than the loaded round. Plan on .001 springback so that gives you really .002 neck tension which is the critical factor. BH [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
How much neck tension
Top