Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Equipment Discussions
Hightech Stocks
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="EddieHarren" data-source="post: 106740" data-attributes="member: 5138"><p>I built a 260 Rem on a 600 action a few years ago and I wanted it to be real light. I got a High Tech stock from Brownells' and pillar bedded it. The rifle ended up weighing 6.5 lbs. with the Leupold 3x9 scope. About 2 weeks after I finished the rifle I took it out of the safe to go to the range and noticed that the barrel was making contact with the stock at the tip of the forearm along the left side. This was a surprise as it was not this way when I originally bedded it. I re-bedded the rifle (milling out all of the bedding material and starting over). After this everything looked great. Two weeks later the stock was touching the barrel again in the same spot. Got rid of that stock and went to a Mod 7 from McMillan and have never been happier. The High Tech was plenty light but not stable enough for me.</p></blockquote><p></p>
[QUOTE="EddieHarren, post: 106740, member: 5138"] I built a 260 Rem on a 600 action a few years ago and I wanted it to be real light. I got a High Tech stock from Brownells' and pillar bedded it. The rifle ended up weighing 6.5 lbs. with the Leupold 3x9 scope. About 2 weeks after I finished the rifle I took it out of the safe to go to the range and noticed that the barrel was making contact with the stock at the tip of the forearm along the left side. This was a surprise as it was not this way when I originally bedded it. I re-bedded the rifle (milling out all of the bedding material and starting over). After this everything looked great. Two weeks later the stock was touching the barrel again in the same spot. Got rid of that stock and went to a Mod 7 from McMillan and have never been happier. The High Tech was plenty light but not stable enough for me. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Equipment Discussions
Hightech Stocks
Top