Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Help with accuracy
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="D.Camilleri" data-source="post: 1193387" data-attributes="member: 2567"><p>The new barrel break in continues. 101 grs of RL33 with the 300 gr Berger is shooting very well. Shot two groups around an inch at 400 yards. OAL is 3.800 and it is still .090 off the lands.</p><p></p><p>I haven't found the right node yet with H1000 and the Bergers, 90 grs left a pretty heavy ejector mark on the brass. I backed the load off to 89gr and it is about an inch maybe a little less at 100 yards.</p><p></p><p>Reloader 33 with the 300 gr accubond isn't in the node yet either. 101 grs seated to 3.675 oal was about 3 inches mostly strung out right to left with a slight ejector mark on the brass. I backed off to 100 gr and seated the bullet .010 closer to the lands and the group shrank by about 1.5 inches. I think I will try seating a little closer to the lands. Right now I am about .030 off the lands with the accubonds.</p></blockquote><p></p>
[QUOTE="D.Camilleri, post: 1193387, member: 2567"] The new barrel break in continues. 101 grs of RL33 with the 300 gr Berger is shooting very well. Shot two groups around an inch at 400 yards. OAL is 3.800 and it is still .090 off the lands. I haven't found the right node yet with H1000 and the Bergers, 90 grs left a pretty heavy ejector mark on the brass. I backed the load off to 89gr and it is about an inch maybe a little less at 100 yards. Reloader 33 with the 300 gr accubond isn't in the node yet either. 101 grs seated to 3.675 oal was about 3 inches mostly strung out right to left with a slight ejector mark on the brass. I backed off to 100 gr and seated the bullet .010 closer to the lands and the group shrank by about 1.5 inches. I think I will try seating a little closer to the lands. Right now I am about .030 off the lands with the accubonds. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Help with accuracy
Top