Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
help trouble shooting chamber issue
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Stiletto150" data-source="post: 1521270" data-attributes="member: 70044"><p>Send it back to Remington. It's a burr that you can probably see if you flip the rifle over, open up the bottom metal. It's a burr from the reamer. Just had the same exact issue with my Ruger. They polished it up and checked headspace issues as well. They might spend a little more time on it this time. I didn't have the rough pull like you did but it could become a safety issue if you reload because it is imprinting in the brass. The other problem is you will never know when you are really close to problem pressures because your always pulling the case over the burr.[ATTACH=full]112818[/ATTACH]</p></blockquote><p></p>
[QUOTE="Stiletto150, post: 1521270, member: 70044"] Send it back to Remington. It's a burr that you can probably see if you flip the rifle over, open up the bottom metal. It's a burr from the reamer. Just had the same exact issue with my Ruger. They polished it up and checked headspace issues as well. They might spend a little more time on it this time. I didn't have the rough pull like you did but it could become a safety issue if you reload because it is imprinting in the brass. The other problem is you will never know when you are really close to problem pressures because your always pulling the case over the burr.[ATTACH=full]112818[/ATTACH] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
help trouble shooting chamber issue
Top