Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
help can anyone run a quickload check please
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="carlazar" data-source="post: 944707" data-attributes="member: 79826"><p>Hello Gus</p><p>Sorry to bother you again,</p><p></p><p>Accubond 160gr</p><p>Have had a look at seating depth with hornady comparator, and I am getting 2.824" to the lands, i deducted 0.020" to reach a seating of 2.804" thats backing off 0.020". I then measured the OAL thats from end to end to get a reading of 3.385" (this is a difference of 0.095" on programme default OAL)</p><p>Was wondering if you could input the corected OAL and see what quickload says.</p><p></p><p>The measurements for the 160gr partition, were 2.742" to lands measured from ogive (no backing off) and overall from tip to base is 3.306" bearing in mind that the lead tip on partition is subject to changes in shape seize etc.</p><p></p><p>Does quick load have an input for the ogive to lands measurement or is it always OAL tip to base ??</p><p>I also assume that the highlighted parts would seem to be the otptimum charge for magpro, and best bullet exit time for that length of barrel (27") all within the safe pressure zone?</p></blockquote><p></p>
[QUOTE="carlazar, post: 944707, member: 79826"] Hello Gus Sorry to bother you again, Accubond 160gr Have had a look at seating depth with hornady comparator, and I am getting 2.824" to the lands, i deducted 0.020" to reach a seating of 2.804" thats backing off 0.020". I then measured the OAL thats from end to end to get a reading of 3.385" (this is a difference of 0.095" on programme default OAL) Was wondering if you could input the corected OAL and see what quickload says. The measurements for the 160gr partition, were 2.742" to lands measured from ogive (no backing off) and overall from tip to base is 3.306" bearing in mind that the lead tip on partition is subject to changes in shape seize etc. Does quick load have an input for the ogive to lands measurement or is it always OAL tip to base ?? I also assume that the highlighted parts would seem to be the otptimum charge for magpro, and best bullet exit time for that length of barrel (27") all within the safe pressure zone? [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
help can anyone run a quickload check please
Top