Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
HEADSPACE GAUGES QUESTION
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="DUSTY NOGGIN" data-source="post: 1456008" data-attributes="member: 89550"><p>so i built a couple.</p><p> one at .227 (( long one ))</p><p>and another at .2235</p><p></p><p>made from drill rod , should i harden them or could that mess with the dimensions ,do you think they will be hard enough the way they are</p><p></p><p>i ordered a remage type barrel which should be here soon, and they sell all the tools if you need them , they had everything except for the gauges , i thought gauges would be readily available elsewhere , but they were out midway brownells and forester ,</p><p></p><p>i found some others at 50+ each plus the shipping</p><p></p><p>i kinda messed up the shorty , but think it will still work . the belt lip goes up to an angle rather than being a 90 degree - but the diameter right there is still only .005 less than the extractor ring (at .535).. the start of the case wall closest to the belt is supposed to be .5135 so i should still have .15 to make contact -- if it doesn't work ill build another to match the long one</p></blockquote><p></p>
[QUOTE="DUSTY NOGGIN, post: 1456008, member: 89550"] so i built a couple. one at .227 (( long one )) and another at .2235 made from drill rod , should i harden them or could that mess with the dimensions ,do you think they will be hard enough the way they are i ordered a remage type barrel which should be here soon, and they sell all the tools if you need them , they had everything except for the gauges , i thought gauges would be readily available elsewhere , but they were out midway brownells and forester , i found some others at 50+ each plus the shipping i kinda messed up the shorty , but think it will still work . the belt lip goes up to an angle rather than being a 90 degree - but the diameter right there is still only .005 less than the extractor ring (at .535).. the start of the case wall closest to the belt is supposed to be .5135 so i should still have .15 to make contact -- if it doesn't work ill build another to match the long one [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
HEADSPACE GAUGES QUESTION
Top