Hart 7mm STW barrel $275 shipped CONUS

Discussion in 'Gun Parts - Stocks, Barrels, Actions, etc.' started by upjeeper, May 9, 2011.

  1. upjeeper

    upjeeper Well-Known Member

    Messages:
    67
    Joined:
    Jun 5, 2005
    I bought this, had a smith thread a stainless break on it then I realized it's an STW not a standard 7mm Rem Mag (rookie mistake). I've got about $300 into it, would like to just get my money out of it.

    Hart 7mm Rem Mag STW rifle 23" barrel. It has a 1-10" twist. Is in excellent condition. It came off a Remington 700 action. It is a stainless barrel with a special teflon coating. I believe the round count is below 50 but I cannot prove that.

    Below pictures are showing the taper comparison next to a ruger 10/22 straight taper bull barrel and Remington 700 7mm Mag, I believe it's standard taper. The finish is slightly marred, but has no impact on the functionality.

    Trades considered - worst case I say no thank you.

    [​IMG]


    [​IMG]


    [​IMG]

    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]
     
  2. upjeeper

    upjeeper Well-Known Member

    Messages:
    67
    Joined:
    Jun 5, 2005
    bumping the thread.
     

  3. upjeeper

    upjeeper Well-Known Member

    Messages:
    67
    Joined:
    Jun 5, 2005
    $250 shipped
     
  4. upjeeper

    upjeeper Well-Known Member

    Messages:
    67
    Joined:
    Jun 5, 2005
    still available
     
  5. upjeeper

    upjeeper Well-Known Member

    Messages:
    67
    Joined:
    Jun 5, 2005
    would consider 6.5 or 6.8 upper or components as trade or partial trade

    i've been asked about the round count. I do not know for sure, but i believe it to be under 50 or 100 rounds. I looked at it last night with a flashlight (tried to take pictures but my camera didn't seem to like it). The entrance to the chamber has a bit of wear from rounds going in and out, but the throat still has tooling marks from when it was reamed. Still appears to have very low rounds through it.
     
    Last edited: Jun 28, 2011
  6. upjeeper

    upjeeper Well-Known Member

    Messages:
    67
    Joined:
    Jun 5, 2005
    still available.
    $250 shipped CONUS
     
  7. upjeeper

    upjeeper Well-Known Member

    Messages:
    67
    Joined:
    Jun 5, 2005
    trade for a .308 barrel for a savage bolt action
     
  8. Lyons7STW

    Lyons7STW Well-Known Member

    Messages:
    219
    Joined:
    Sep 7, 2011
    Pics arehard to see on my phone. Is that a holland QD break?
    Is it 24" + break?
     
  9. upjeeper

    upjeeper Well-Known Member

    Messages:
    67
    Joined:
    Jun 5, 2005
    I don't believe it's a holland break, was made by a smith in UT (if i remember correctly, had the work done last winter or so)

    i haven't looked at it in a few weeks (sitting in my safe), but i think the barrel itself is 24 inches, plus the brake makes it about 25.5 inches overall
     
  10. Lyons7STW

    Lyons7STW Well-Known Member

    Messages:
    219
    Joined:
    Sep 7, 2011
    Next time you have it out see if you can get a weight on it.
    I really lile a holland qd break and 26" barrells. IMO the stw needs the length to pick up speed.
    It doesn't look all that heavy... which is good for my style.
    Very tempting!
     
  11. upjeeper

    upjeeper Well-Known Member

    Messages:
    67
    Joined:
    Jun 5, 2005
    i really don't know if it is a QD Holland brake or if it's a good knock off, i looked them up when i got home tonight, sure looks like it

    the barrel weighs in at 3.5 lbs - very roughly based on my postal scale
     
  12. upjeeper

    upjeeper Well-Known Member

    Messages:
    67
    Joined:
    Jun 5, 2005
    still available.

    trade for
    - a savage action (prefer .308 boltface)
    - decent glass
    - ???
     
  13. curtis

    curtis Well-Known Member

    Messages:
    188
    Joined:
    Jun 25, 2005
    Will this barrel fit on my 110 FP in .25-06? I believe I have the small shank. If I am right, I'll need a new bolt face and maybe an upgraded recoil lug. Does this sound right?
     
  14. upjeeper

    upjeeper Well-Known Member

    Messages:
    67
    Joined:
    Jun 5, 2005
    hi, thanks for your interest, but the barrel just sold.

    regards