Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Hard to close bolt.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Lefty7mmstw" data-source="post: 1245943" data-attributes="member: 48043"><p>you aren't camming your press over. There should be resistance at the top of the stroke where your shellholder presses on the bottom of the die. Turn your die all the way down, back the ram off a bit, and turn the die in a bit more... If you need longer cases get a shellholder with a different height ( see the redding competition set) or have your barrel turned back and re-chambered so your chamber is correct...</p><p></p><p>as to old brass in your new chamber, if you can get your dimensions down enough it should work, but it may not. You may be forced to use new brass and size that brass correctly for the new chamber.</p><p></p><p></p><p><u><a href="http://www.midwayusa.com/product/319992/redding-competition-shellholder-set-6-7mm-remington-magnum-300-winchester-magnum-338-winchester-magnum" target="_blank">Redding Competition Shellholder Set #6 (7mm Remington Mag 300</a></u></p></blockquote><p></p>
[QUOTE="Lefty7mmstw, post: 1245943, member: 48043"] you aren't camming your press over. There should be resistance at the top of the stroke where your shellholder presses on the bottom of the die. Turn your die all the way down, back the ram off a bit, and turn the die in a bit more... If you need longer cases get a shellholder with a different height ( see the redding competition set) or have your barrel turned back and re-chambered so your chamber is correct... as to old brass in your new chamber, if you can get your dimensions down enough it should work, but it may not. You may be forced to use new brass and size that brass correctly for the new chamber. [U][URL="http://www.midwayusa.com/product/319992/redding-competition-shellholder-set-6-7mm-remington-magnum-300-winchester-magnum-338-winchester-magnum"]Redding Competition Shellholder Set #6 (7mm Remington Mag 300[/URL][/U] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Hard to close bolt.
Top