Great Surprise

Discussion in 'Rifles, Bullets, Barrels & Ballistics' started by Hollister DeLong, Jan 29, 2013.

  1. Hollister DeLong

    Hollister DeLong New Member

    Messages:
    4
    Joined:
    Nov 16, 2012
    I bought an FN Mauser on line cheap. It has a highly figured maple stock and an aftermarket barrel. The owner did not know for certain the caliber...only a 6MM bore. Well, I had the barrel cast and it is a 6-284! I was planning on building one of them...now I don't have to. Suggestions on a load? I think I am going to use Berger 115 grain and 52 grains of Reloader 22 to start. I need to recheck the twist, but I believe it is 1:9.
     
  2. diriel

    diriel Well-Known Member

    Messages:
    409
    Joined:
    Sep 22, 2010
    1-9 might be a little slow to stabilize the 115's. Even 105's might be iffy depending on altitude etc. Grats on your new stick :)