Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Goto loads for 7mm REM Mag and 160 Accubonds
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="55stone" data-source="post: 1691469" data-attributes="member: 107643"><p>Well I don't have a set load that I like yet.. using 160 GR. Accubonds, Reloader 22, CCI 250 primers.. I have done load work from min. Suggested powder charge up to 65.00 of powder with no real luck. Im bumping the shoulder back .003 on what was new brass when I started load devolpemnt. I haven't really played with seating depth as I was hoping to get a powder charge I was confident with first. I have been loading to .010 off the lands.. I did try and set of 2 powder charge weights jammed into the lands and also ran a set of 64.0 to 64.8 grains at SAMMI max COAL just for fun. I'm starting to think it's the rifle.. rifle is a Remington 700 LA 26" factory sporter barrel with a HS precision stock, trigger tech trigger. I do have a chronograph that is a *** but I have been running all of these over the chronograph.getting around 2900 depending on load obviously.</p></blockquote><p></p>
[QUOTE="55stone, post: 1691469, member: 107643"] Well I don’t have a set load that I like yet.. using 160 GR. Accubonds, Reloader 22, CCI 250 primers.. I have done load work from min. Suggested powder charge up to 65.00 of powder with no real luck. Im bumping the shoulder back .003 on what was new brass when I started load devolpemnt. I haven’t really played with seating depth as I was hoping to get a powder charge I was confident with first. I have been loading to .010 off the lands.. I did try and set of 2 powder charge weights jammed into the lands and also ran a set of 64.0 to 64.8 grains at SAMMI max COAL just for fun. I’m starting to think it’s the rifle.. rifle is a Remington 700 LA 26” factory sporter barrel with a HS precision stock, trigger tech trigger. I do have a chronograph that is a *** but I have been running all of these over the chronograph.getting around 2900 depending on load obviously. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Goto loads for 7mm REM Mag and 160 Accubonds
Top