FS Browning Stainless Stalker 7mm mag

Discussion in 'Guns For Sale' started by Boman, Aug 4, 2011.

  1. Boman

    Boman Well-Known Member

    Messages:
    1,067
    Joined:
    Sep 25, 2002
    Browning A Bolt 7mm mag Stainless Stalker. It also has the BOSS muzzle break. The factory stock has been replaced with a Bell and Carlson medalist stock with the full length alluminum bedding block. The trigger spring has also been replaced with a 2lb spring it has no creep and no overtravel. It has been shot about 125 times. I have the Boss setting for a number of different loads. It shoots the 168gr Bergers the best. Great shooting rifle. It also has a set of Talley light weight 30mm rings. No trades please need the funds. $975 plus shipping. These are $1200 new without the custom stock. Thanks for looking. Great long range deer rig. Please PM or email me: michaelgmontoya@msn.com
     

    Attached Files:

    Last edited: Aug 4, 2011
  2. bkondeff

    bkondeff Well-Known Member

    Messages:
    345
    Joined:
    Feb 2, 2008

    Any additional info on groups with bergers and how the loaded bullets fit in Magazine. My friend has this same gun and to get the bullets seated properly we had to have the magazine modified by a smith. I am interested, but would like confirm on load, groups, and velocity if avail.
     

  3. Boman

    Boman Well-Known Member

    Messages:
    1,067
    Joined:
    Sep 25, 2002
    bkondeff,

    This is a rifle I received in trade. I know that the rifle will hold 1/2 to 3/4 moa at 300yds. I have load data for a few different loads as I mentioned and the COAL is 3.370. I don't know what the magazine length is right now but I can get it. I can also put you in touch with the previous owner. I know it shot very well for him and he did not have any magazine work done. I don't have the velocity figures but I might be able to get that.
     
  4. tim1457

    tim1457 Well-Known Member

    Messages:
    57
    Joined:
    Jan 23, 2010
    Hey, nice rifle. I own a few brownings and just wanted to comment on the bullet length for the magazine. I have (2) .300 win. Mags. And when i reloaded the bullet was too long for the box. I took the box to my smith to see if it could be machined and he told me to save it and buy a box made for a .375. It worked perfectly!! The .375 held the longer reloads and if i ever sell one i still have the original box. Just an idea to share.
     
  5. Boman

    Boman Well-Known Member

    Messages:
    1,067
    Joined:
    Sep 25, 2002
    Thanks Tim for that tip. Sounds like an easy way to get more magazine length.

    Bkondeff,
    The loaded rds fit to length in the magazine. The avg velocity for the 168gr bergers is 2865fps with very little deviation. Let me know if you have other questions
     
  6. Boman

    Boman Well-Known Member

    Messages:
    1,067
    Joined:
    Sep 25, 2002
    Price reduced to $875 plus shipping
     
  7. Boman

    Boman Well-Known Member

    Messages:
    1,067
    Joined:
    Sep 25, 2002
    sold pending funds..