FL sized brass wont eject?

Discussion in 'Reloading' started by moosehunter, Dec 28, 2005.

  1. moosehunter

    moosehunter Well-Known Member

    Messages:
    128
    Joined:
    Mar 19, 2002
    I just ran all my 6.5-284 brass through the Redding FL body die and now a lot of them wont extract. All chambers nice but the extractor wont pick up a bunch of them. When fired will they expand into the extractor?
     
  2. Fiftydriver

    Fiftydriver <strong>Official LRH Sponsor</strong>

    Messages:
    6,848
    Joined:
    Jun 12, 2004
    What brand of rifle are you using?

    Sounds like the extractor needs some adjustments.

    If the brass is expanding into the extractor and not allowing ejection or extraction I would say you have a pressure issue to deal with.

    Let us know what rifle your working with and we can start from there.

    Kirby Allen(50)
     

  3. moosehunter

    moosehunter Well-Known Member

    Messages:
    128
    Joined:
    Mar 19, 2002
    The rifle is a PGW M15 action. The brass isnt bieng fired, just sized then chambered. Im wondering if the die is sizing the web down to much.