Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
First custom build 6mm-06 looking for data.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Budman" data-source="post: 1059685" data-attributes="member: 1856"><p>With the 105 Hybreds I am running 62 grains of RE-33, Fed 210M primers and .005 jump. The load is averaging 3469 again with a 28 inch barrel. I also use a long drop tube. For brass I use laupa 06 brass and step in down first with a 270 die, then a Redding full length s die with a .292 bushing and finally finish off with a 243 die. The brass will need trimming between each step. I end up with 3/4 of the neck sized this way and have a nice tight neck fit in the chamber. My grandkids love the guns and have already claimed them for their own use...</p></blockquote><p></p>
[QUOTE="Budman, post: 1059685, member: 1856"] With the 105 Hybreds I am running 62 grains of RE-33, Fed 210M primers and .005 jump. The load is averaging 3469 again with a 28 inch barrel. I also use a long drop tube. For brass I use laupa 06 brass and step in down first with a 270 die, then a Redding full length s die with a .292 bushing and finally finish off with a 243 die. The brass will need trimming between each step. I end up with 3/4 of the neck sized this way and have a nice tight neck fit in the chamber. My grandkids love the guns and have already claimed them for their own use... [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
First custom build 6mm-06 looking for data.
Top