F.s. Lilja 338 edge barrel savage small shank

Discussion in 'Gun Parts - Stocks, Barrels, Actions, etc.' started by TrophyHunter_colorado, Nov 5, 2012.

  1. TrophyHunter_colorado

    TrophyHunter_colorado Well-Known Member

    Messages:
    581
    Joined:
    Feb 2, 2009
    I have a savage small shank 338 EDGE 1:10 30" #3 contour barrel for sale with a KDF sniper brake installed by Matt Cockerel of MC gunsmithing. The only reason im wanting to get rid of this barrel is because im wanting funds for another build. My 300 win is shooting lights out with the berger 230 grain OTM hybrids. Any body with a savage magnum bolt face rifle can be shooting this set up in minutes. This barrel has 50 rounds down the tube for brake in only. I did brake in procedures as instructed by Dan Lilja. Barrel comes with as follows
    Redding 338 EDGE die set fl die and seating die
    48 once fire formed nosler custom brass
    Head space "GO" gauge
    I have some 300 grain OTM hybrids I will throw in with it
    During brake in I used load developed for my other edge and it was shooting 3/4 moa at 200 yards.

    Between getting barrel chambered, muzzle brake installed,brass, dies I have close to 850.00 invested. Im wanting 650.00 for everything listed. Im wanting cash but if you have a proven lr rifle or high end range finder I would be interested. I would of course make up the difference in cash if item was worth more then mine.
     
  2. branwill25

    branwill25 Well-Known Member

    Messages:
    510
    Joined:
    Feb 9, 2012
    Hey I can't reply to your PM because they say you have too many messages. Here is my reply:

    No I have an entire rig in an AR platform with stainless barrel, quad rail, dies, 550+ brass, red dot sight, and some ammo. I can send you pictures of everything. I have over 1200 invested in everything so I would like cash or something to make up the difference. Let me know what you think.
     

  3. TrophyHunter_colorado

    TrophyHunter_colorado Well-Known Member

    Messages:
    581
    Joined:
    Feb 2, 2009
    Ha ha try it now what make of platform