Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
excessive bullet runout on new 7-08 AI
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="jmbn" data-source="post: 73700" data-attributes="member: 1318"><p>I could use some advice on a problem with a new chambering. A friend just gave me a new stainless take-off barrel in 7-08 from a 700 CDL, and I had a gunsmith rechamber it to 7-08 AI and I put it on a proven 700 short action that I've had for about 30 years.. I had some new Lapua brass in 308 and using some new Hornady dies I necked down the necks so that it was a firm fit in the new chamber and fireformed the box of loads by taking it along on a sage rat hunt. </p><p></p><p>I bought a new Redding FL die in 7-08 Imp. and loaded enough rounds for several groups using both Nosler BT's and Hornady SST's, both of which I had on hand. I used the Hornady seater, which is a "Dumore" die which should work for everything from 7-08 to the 7mm belted mags, maybe even bigger. The groups ranged from 1.25 to about 2", which is pretty disgusting. On my return I ran the remaining loads thru a runout indicator and there was as much as .012 runout on the bullets. The runout on the necks of the fired cases was almost nothing. I had not turned down the necks of the brass yet, but obviously checked to be sure that there was clearance for the loaded necks.</p><p></p><p>Any ideas about what's causing this runout? I did not think to check the runout on the virgin brass that I loaded for fireforming, and it's too late now. I'm thinking it might be the seating die. Most of my life I've used RCBS dies and have not had a problem other than many of the sizing dies being tight, which I correct with a drill press and valve grinding compound. Have any of you used the Hornady dies with the universal (for caliber) seaters? Another possibility, it seems to me, is that the expander nipple might be pulling the necks off-center.</p><p></p><p>I'm a deer hunter, not a benchrest shooter, and if this rifle will shoot ¾" groups I'll be happy, and if it shoots ½" groups I'll be delighted. Since this runout is much more than any of my other rifles I think I should look there first before condemning the barrel.</p><p></p><p>Thanks for any input.</p></blockquote><p></p>
[QUOTE="jmbn, post: 73700, member: 1318"] I could use some advice on a problem with a new chambering. A friend just gave me a new stainless take-off barrel in 7-08 from a 700 CDL, and I had a gunsmith rechamber it to 7-08 AI and I put it on a proven 700 short action that I’ve had for about 30 years.. I had some new Lapua brass in 308 and using some new Hornady dies I necked down the necks so that it was a firm fit in the new chamber and fireformed the box of loads by taking it along on a sage rat hunt. I bought a new Redding FL die in 7-08 Imp. and loaded enough rounds for several groups using both Nosler BT’s and Hornady SST’s, both of which I had on hand. I used the Hornady seater, which is a “Dumore” die which should work for everything from 7-08 to the 7mm belted mags, maybe even bigger. The groups ranged from 1.25 to about 2”, which is pretty disgusting. On my return I ran the remaining loads thru a runout indicator and there was as much as .012 runout on the bullets. The runout on the necks of the fired cases was almost nothing. I had not turned down the necks of the brass yet, but obviously checked to be sure that there was clearance for the loaded necks. Any ideas about what’s causing this runout? I did not think to check the runout on the virgin brass that I loaded for fireforming, and it’s too late now. I’m thinking it might be the seating die. Most of my life I’ve used RCBS dies and have not had a problem other than many of the sizing dies being tight, which I correct with a drill press and valve grinding compound. Have any of you used the Hornady dies with the universal (for caliber) seaters? Another possibility, it seems to me, is that the expander nipple might be pulling the necks off-center. I’m a deer hunter, not a benchrest shooter, and if this rifle will shoot ¾” groups I’ll be happy, and if it shoots ½” groups I’ll be delighted. Since this runout is much more than any of my other rifles I think I should look there first before condemning the barrel. Thanks for any input. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
excessive bullet runout on new 7-08 AI
Top