Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Drop in Velocity?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="bcraft1111" data-source="post: 60046" data-attributes="member: 3580"><p>Thanks again for taking time to help me with this. </p><p></p><p>I looked back in my journal and my aol for the X bullet was 3.632 I found the most consistant ES was at 3.575 AOL. at 3729 FPS.</p><p></p><p>By the way I do not understand ( on the shorter then full length Warbird case ) What do you mean. I trim my brass to 2.790. Maximum case length is 2.810 is this what you are talking about.</p><p></p><p>I have also seen some post about tightning the action bolts to 65# when I take my actioned barrel out of the stock should it be tightned to a specific torque when I place it back in the stock. </p><p></p><p>Brian was talking about the heavier bullets. If I were going to rebarrel my rifle would you change the twist rate to something other than a 12 twist.to shoot the 180 grain at 3550 fps. And what if I used a 30 in barrel. </p><p></p><p>I loved the Rosie thing Point taken. Thanks Brian</p></blockquote><p></p>
[QUOTE="bcraft1111, post: 60046, member: 3580"] Thanks again for taking time to help me with this. I looked back in my journal and my aol for the X bullet was 3.632 I found the most consistant ES was at 3.575 AOL. at 3729 FPS. By the way I do not understand ( on the shorter then full length Warbird case ) What do you mean. I trim my brass to 2.790. Maximum case length is 2.810 is this what you are talking about. I have also seen some post about tightning the action bolts to 65# when I take my actioned barrel out of the stock should it be tightned to a specific torque when I place it back in the stock. Brian was talking about the heavier bullets. If I were going to rebarrel my rifle would you change the twist rate to something other than a 12 twist.to shoot the 180 grain at 3550 fps. And what if I used a 30 in barrel. I loved the Rosie thing Point taken. Thanks Brian [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Drop in Velocity?
Top