Infamous
Well-Known Member
Hey everyone! 
I'm selling my lightly used M40A5 "esque" Clone.
Only 200 rounds of various 308 168gr and 175gr loads (Norma, Nosler, and a few others), fired down the pipe. Without any load work, or serious accuracy tests (just schwackin' steel & punching some paper), it shot consistently .5" groups at 100meters.
Specs:
- Defiance Deviant Tactical Left Handed action
- 0moa integral rail
- Integral Recoil lug
- Defiance Tactical Long bolt handle
- Defiance Flat bolt face
- Badger EFR cut at McMillan, & bedded/installed at LongRifles,INC (Badger EFR side rail included)
- Chambered 308Win at LRI
- Bartlein M24 Contour Stainless Steel Barrel 1:10 twist 5R ... Finished to 25" barrel length ... Threaded/crowned 5/8x24 with LRI custom thread protector
- Barreled Action Cerakoted Black at LRI
- McMillan A4 (Sniper Fill)
- Saddle Adjustable Cheek Rest
- 4" front/Bipod picatinny rail
- 13.5" LOP (1" Decelerator Pad)
- Front/Rear Right side QD sling cups installed at McMillan
- McMillan OD Green Solid Molded Color
- TriggerTech Diamond LH Flat Trigger
- Badger Ordnance M5 DBM
- Badger M5 pillars bedded by myself
- 4 AI AW magazines, Defiance action accepts these awesome DoubleStack/DoubleFeed magazines
- TacOps Sniper DragBag (MultiCam), the best DragBag on the market, 43" shooting mat included (pictured).
- 4 Triad Tactical MultiCam AW magazine MOLLE pouches
Don't hesitate to shoot me a PM / ask a question!
NO TRADES / I won't be parting this out.
$4200 SHIPPED (UPS Ground 48 CONUS) to your local/preferred FFL
*** NOTE: LongRangeHunting won't let you edit any given post after 2 weeks; for any updates at that point, check below ***
****** MORE PHOTOS IN THE NEXT POST ******
I'm selling my lightly used M40A5 "esque" Clone.
Only 200 rounds of various 308 168gr and 175gr loads (Norma, Nosler, and a few others), fired down the pipe. Without any load work, or serious accuracy tests (just schwackin' steel & punching some paper), it shot consistently .5" groups at 100meters.
Specs:
- Defiance Deviant Tactical Left Handed action
- 0moa integral rail
- Integral Recoil lug
- Defiance Tactical Long bolt handle
- Defiance Flat bolt face
- Badger EFR cut at McMillan, & bedded/installed at LongRifles,INC (Badger EFR side rail included)
- Chambered 308Win at LRI
- Bartlein M24 Contour Stainless Steel Barrel 1:10 twist 5R ... Finished to 25" barrel length ... Threaded/crowned 5/8x24 with LRI custom thread protector
- Barreled Action Cerakoted Black at LRI
- McMillan A4 (Sniper Fill)
- Saddle Adjustable Cheek Rest
- 4" front/Bipod picatinny rail
- 13.5" LOP (1" Decelerator Pad)
- Front/Rear Right side QD sling cups installed at McMillan
- McMillan OD Green Solid Molded Color
- TriggerTech Diamond LH Flat Trigger
- Badger Ordnance M5 DBM
- Badger M5 pillars bedded by myself
- 4 AI AW magazines, Defiance action accepts these awesome DoubleStack/DoubleFeed magazines
- TacOps Sniper DragBag (MultiCam), the best DragBag on the market, 43" shooting mat included (pictured).
- 4 Triad Tactical MultiCam AW magazine MOLLE pouches
Don't hesitate to shoot me a PM / ask a question!
NO TRADES / I won't be parting this out.
$4200 SHIPPED (UPS Ground 48 CONUS) to your local/preferred FFL
*** NOTE: LongRangeHunting won't let you edit any given post after 2 weeks; for any updates at that point, check below ***
****** MORE PHOTOS IN THE NEXT POST ******
