Custom Rem Model-7 in 6x47 Lapua

Discussion in 'Guns For Sale' started by James Jones, Mar 21, 2008.

  1. James Jones

    James Jones Well-Known Member

    Messages:
    2,854
    Joined:
    Jul 1, 2002
    Hey guys , hate to do this but I gotta sell off some of the toys to help pay for a sickness in the family. This gun was being built as my personal 600yd and 1000yd F-class rig.

    Its a Rem model 7 action fully buleprinted with custom fitted PT&G bolt with Sako extractor , the rear action screw hole has been opened up to 1/4-28 like the front one and the action is blued , their is a Riflebasix trigger 2-8 oz on the way also
    The barrel is a 26.5 inch Bartlein , 1-7.5 twist with the 5R rifleing , the barrel and the Holland recoil lug have both been polished to a mirror finish zero rounds through , it ready for the 115 Bergers
    The stock is one of Joel Russo's A5L in black on brown ,the stock is unfinished and only partialy bedded with oversized contured aluminum pillars. The stock is setup for a single shot and will be finish bedded before it ships I'm waiting on a single shot follower from PT&G to finish the bedding , is an ADL bottom with a 1.125" polished SS pillar cap for the front screw to fit into.

    The barreld action was put together by IBS world record holder and hall of fame shooter/builder Don Geraci , chambered with a very well proven match winning reamer that has several guns shooting sub 2" groups at 600yds. The stock will have be bedded by me with custom built over sized fully contured pillers and around a full pound of Devcon that will have 2" of the barrel recoil lug and all of the action bedded. I also have a polished Aluminum but plate ready to be finish fitted when the stock is finish sanded and ready for clear coat.

    I'm asking $1400 shipped and insured for the complete package or $1000 for the barreled action. Not realy considering any trades as these funds will go to bills. I'm just trying to get out of it what I got in it.

    I'll have some pics of both tomorrow when I can get them in the daylight and wet down the stock

    this is one hell of a cheap way to get into F-class , bench rest or 1000+yd varmints
     

  2. eddybo

    eddybo Well-Known Member

    Messages:
    1,651
    Joined:
    Jan 5, 2007
    James, check your PMs
     

  3. 308 nate

    308 nate Well-Known Member

    Messages:
    896
    Joined:
    Jan 1, 2004
    James,
    That sounds like an awesome rifle build and a heck of a good deal!
    I hope the family is on the mend and all is well soon.

    Nate
     
  4. Joel Russo

    Joel Russo Official LRH Sponsor

    Messages:
    2,771
    Joined:
    Jul 5, 2006
    James,

    Need a picture to put on the board in the shop.
     
  5. James Jones

    James Jones Well-Known Member

    Messages:
    2,854
    Joined:
    Jul 1, 2002
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  6. Tyler Kemp

    Tyler Kemp SPONSOR

    Messages:
    1,461
    Joined:
    Aug 10, 2006
    I would have never chose that stock for a stainless barrel but it looks stunning!
     
  7. James Jones

    James Jones Well-Known Member

    Messages:
    2,854
    Joined:
    Jul 1, 2002
    With just a little effort the stock looks amazing with a deep gloss against that polished SS
     
  8. James Jones

    James Jones Well-Known Member

    Messages:
    2,854
    Joined:
    Jul 1, 2002
    Rifle is sold pending funds.

    thanks everybody