Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
custom barrel for .300 ultra
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="BlackKnight755" data-source="post: 450492" data-attributes="member: 25675"><p>I would go with a broughton. I have shot them for a long time and have NO complaints. I currently have a .300 RUM with a Broughton 32" 5C 1.45" straight blank barrel that is a 10 twist. It is very heavy, but it helps tame the recoil of the rifle. I get very good results with the Berger 210s and the 155s. I shoot the 210s with 97.5 gr of H-1000 @ 3450 fps and the 155s with 107 gr H-1000 @ 3950. Both of these loads are VERY accurate out to at least 1000 yards. I cant test longer yardages so I dont know. around .3 MOA from 100 to 1000 yards.</p><p> </p><p>Anyway, to get back to your question I would get the broughton with the factory Remington taper, if you like that taper with a 10 twist to stabalize the heavy bullets and just pick the length you want and go from there. I don't think you'll be dissatisfied.</p></blockquote><p></p>
[QUOTE="BlackKnight755, post: 450492, member: 25675"] I would go with a broughton. I have shot them for a long time and have NO complaints. I currently have a .300 RUM with a Broughton 32" 5C 1.45" straight blank barrel that is a 10 twist. It is very heavy, but it helps tame the recoil of the rifle. I get very good results with the Berger 210s and the 155s. I shoot the 210s with 97.5 gr of H-1000 @ 3450 fps and the 155s with 107 gr H-1000 @ 3950. Both of these loads are VERY accurate out to at least 1000 yards. I cant test longer yardages so I dont know. around .3 MOA from 100 to 1000 yards. Anyway, to get back to your question I would get the broughton with the factory Remington taper, if you like that taper with a 10 twist to stabalize the heavy bullets and just pick the length you want and go from there. I don't think you'll be dissatisfied. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
custom barrel for .300 ultra
Top