Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Custom Advice
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Randy Dunn" data-source="post: 58396" data-attributes="member: 3473"><p>I need some advice on building a gun.</p><p>I am looking to purchase or have built a custom hunting rifle that weights 7 to 8 lbs, is stainless, has a muzzle brake, synthetic stock, detachable magazine, has a fluted match grade barrel, I would like it teflon coated, push feed, the magazine needs to hold at least three, have a three position safety and I would like this gun to shoot 1/2 moa. The gun is going to be used for Alaskan moose and brown bear so I'm wanting to have the gun chambered in .358 STA. There are quite a few reasons I would like to go with the STA but if I were to run into concernes with accuracy I would probably consider one of the fast 38's. Accuracy and dependibility are very important to me. This will be a gun that I do 90% of my hunting with over the next 25 years. I was looking at buying a gun from H-S Precision but I have found a few articles were people are saying that you should expect more than 1 moa from a $2500 gun and that you can build the same gun for less. Hill Country sells a comparable gun and they have the same accuracy garantee; I'm thinking the reason might be the weight of the gun and then maybe they are just giving them selves a little room to move. Well, I've been looking into mach grade barrels from Lilja, Black Star, Rock Creek, and Shilen. I haven't found much on actions, Nesika and Montana Rifleman; I'm sure there are alot more. What I have come up with so far is that Shilen will install a muzzle brake and match the barrel to the action and Mcmillan will install the barrelled action in the stock and add the teflon coating. When you get this far you are at $1800 and that doesn't leave a whole lot for the action and still save money. As you can tell by reading this I am not a gun smith and I don't know of any at the moment that I would feel confident with. Is a 7-8 lbs hunting rifle chambered in 358 sta that shoots 1/2 moa an unrealistic goal for $2000-2500? Thanks for any replies.</p></blockquote><p></p>
[QUOTE="Randy Dunn, post: 58396, member: 3473"] I need some advice on building a gun. I am looking to purchase or have built a custom hunting rifle that weights 7 to 8 lbs, is stainless, has a muzzle brake, synthetic stock, detachable magazine, has a fluted match grade barrel, I would like it teflon coated, push feed, the magazine needs to hold at least three, have a three position safety and I would like this gun to shoot 1/2 moa. The gun is going to be used for Alaskan moose and brown bear so I'm wanting to have the gun chambered in .358 STA. There are quite a few reasons I would like to go with the STA but if I were to run into concernes with accuracy I would probably consider one of the fast 38's. Accuracy and dependibility are very important to me. This will be a gun that I do 90% of my hunting with over the next 25 years. I was looking at buying a gun from H-S Precision but I have found a few articles were people are saying that you should expect more than 1 moa from a $2500 gun and that you can build the same gun for less. Hill Country sells a comparable gun and they have the same accuracy garantee; I'm thinking the reason might be the weight of the gun and then maybe they are just giving them selves a little room to move. Well, I've been looking into mach grade barrels from Lilja, Black Star, Rock Creek, and Shilen. I haven't found much on actions, Nesika and Montana Rifleman; I'm sure there are alot more. What I have come up with so far is that Shilen will install a muzzle brake and match the barrel to the action and Mcmillan will install the barrelled action in the stock and add the teflon coating. When you get this far you are at $1800 and that doesn't leave a whole lot for the action and still save money. As you can tell by reading this I am not a gun smith and I don't know of any at the moment that I would feel confident with. Is a 7-8 lbs hunting rifle chambered in 358 sta that shoots 1/2 moa an unrealistic goal for $2000-2500? Thanks for any replies. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Custom Advice
Top