Chamber polishing

Discussion in 'Rifles, Bullets, Barrels & Ballistics' started by coupalr, Nov 22, 2005.

  1. coupalr

    coupalr Well-Known Member

    Messages:
    218
    Joined:
    Aug 24, 2005
    I need some advise. I had a case split on me the other day in my 300 win mag and it burnt a notch into the chamber. Now I have been told to just polish the chamber but I don't know how this may effect the overall dimensions. Will it effect my head spacing? Should I just have it rechambered. How much will have to be taken off of the barrel to rechamber it? The seperation took place about 0.4" from the base.
     
  2. sabayan

    sabayan New Member

    Messages:
    1
    Joined:
    Oct 18, 2005

  3. Freebore

    Freebore Well-Known Member

    Messages:
    611
    Joined:
    Oct 23, 2002
    I had this happen this year also and just cleaned up the chamber with JB bore cleaner. I did not burn a notch though in the chamber, I thought it may have but it was just a roughed up area where the case had slipt which did clean up. Try something like JB or Flitz first to see what you really have.