Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Case sizing problems?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="rcoody" data-source="post: 1155159" data-attributes="member: 91090"><p>strange to say the least.</p><p> </p><p>I am going to ask some questions that may sound a little stupid.</p><p> </p><p>You have your cases well lubed all the way to the case head?</p><p> </p><p>when you have a case in the die have you looked to see if at the bottom of the stroke the case is all the way in?</p><p> </p><p>Have you disassembled the die and checked to make sure there is no obstruction or the expander ball stopping the case from going all the way down? Is the expander ball/depriming pin set too deep and bottoming out against the case head?</p><p> </p><p>while you have the die disassembled clean the inside of the die well with your cleaning solvent. Might be a buildup of lube keeping the case from going all the way in.</p></blockquote><p></p>
[QUOTE="rcoody, post: 1155159, member: 91090"] strange to say the least. I am going to ask some questions that may sound a little stupid. You have your cases well lubed all the way to the case head? when you have a case in the die have you looked to see if at the bottom of the stroke the case is all the way in? Have you disassembled the die and checked to make sure there is no obstruction or the expander ball stopping the case from going all the way down? Is the expander ball/depriming pin set too deep and bottoming out against the case head? while you have the die disassembled clean the inside of the die well with your cleaning solvent. Might be a buildup of lube keeping the case from going all the way in. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Case sizing problems?
Top