Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Case forming issues
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="MagnumManiac" data-source="post: 324424" data-attributes="member: 10755"><p>I doubt the brass has gone brittle.</p><p></p><p>Have you tried removing the expander from the die and running your brass in without it?</p><p>Are you sure you're running them into the die far enough?</p><p>Are you using the FL die or Neck die?</p><p></p><p>If you have a fired case, measure the diameter of the neck and compare it to a sized case and a loaded case, this will soon tell you where the problem lies.</p><p>It may just be that you got a die with a loose neck dimension, but could also be the brass having too little in the neck walls.</p><p></p><p>If you give me the above info I've requested, I may be able to help sooner, instead of going through every possible cause.</p><p>gun)<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite8" alt=":D" title="Big Grin :D" loading="lazy" data-shortname=":D" /></p></blockquote><p></p>
[QUOTE="MagnumManiac, post: 324424, member: 10755"] I doubt the brass has gone brittle. Have you tried removing the expander from the die and running your brass in without it? Are you sure you're running them into the die far enough? Are you using the FL die or Neck die? If you have a fired case, measure the diameter of the neck and compare it to a sized case and a loaded case, this will soon tell you where the problem lies. It may just be that you got a die with a loose neck dimension, but could also be the brass having too little in the neck walls. If you give me the above info I've requested, I may be able to help sooner, instead of going through every possible cause. gun):D [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Case forming issues
Top