Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Bullet Pulling Question
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Shootin4fun" data-source="post: 2620353" data-attributes="member: 28741"><p>After seeing this thread early on, then needing to pull some, I thought I'd run a test and post my results. </p><p></p><p>Pulled 8 rounds of 270win and 6.5CM each. Dumped powder (weighed the dumps in my chargemaster and yes all but one came back exactly as loaded- the one was .1 over, no big deal on a good OCW mode), charged them with a known good load, and fired over a magneto speed. They all reported within 11fps (faster) of expected velocity. SDs on both groups were in the single digits. 3.5fps for 6.5 and 8 for the 270. </p><p></p><p>I will note, they did seat easier than 1st loading and I expected there to be a difference in velocity. </p><p></p><p>Runout on my FL dies with deprimer installed is .001 and I'm lazy so I didn't want to change anything, like removing the depriming pin. </p><p></p><p>BTW, .289 bushing on the 6.5, and standard 270 die so no bushing or tension adjustability there. </p><p></p><p>Both were TTSX. Measured, no diff from me diameter in seated/ scraped area.</p><p></p><p>Just another datapoint.</p></blockquote><p></p>
[QUOTE="Shootin4fun, post: 2620353, member: 28741"] After seeing this thread early on, then needing to pull some, I thought I’d run a test and post my results. Pulled 8 rounds of 270win and 6.5CM each. Dumped powder (weighed the dumps in my chargemaster and yes all but one came back exactly as loaded- the one was .1 over, no big deal on a good OCW mode), charged them with a known good load, and fired over a magneto speed. They all reported within 11fps (faster) of expected velocity. SDs on both groups were in the single digits. 3.5fps for 6.5 and 8 for the 270. I will note, they did seat easier than 1st loading and I expected there to be a difference in velocity. Runout on my FL dies with deprimer installed is .001 and I’m lazy so I didn’t want to change anything, like removing the depriming pin. BTW, .289 bushing on the 6.5, and standard 270 die so no bushing or tension adjustability there. Both were TTSX. Measured, no diff from me diameter in seated/ scraped area. Just another datapoint. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Bullet Pulling Question
Top