Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Bullet Pulling Question
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Lovellr653" data-source="post: 2618675" data-attributes="member: 113949"><p>So I pulled the bad bullets this evening. My neck ID was .3065 (calipers only read to 0.001 needle was between 0.306 and 0.307) which was the same on the remaining brass in this batch I prepped but hadn't loaded yet. For what it's worth I anneal before every sizing and use a mandrel to set my neck tension. I seated new bullets without resizing since there was no difference in ID. I was also thinking resizing would probably work harden the brass more than just pulling and reseating resulting in potentially inconsistent spring back. I'm for sure over thinking this for the intended use of the cartridge but it's an interesting conversation to have with you all. I appreciate everyone's input.</p></blockquote><p></p>
[QUOTE="Lovellr653, post: 2618675, member: 113949"] So I pulled the bad bullets this evening. My neck ID was .3065 (calipers only read to 0.001 needle was between 0.306 and 0.307) which was the same on the remaining brass in this batch I prepped but hadn’t loaded yet. For what it’s worth I anneal before every sizing and use a mandrel to set my neck tension. I seated new bullets without resizing since there was no difference in ID. I was also thinking resizing would probably work harden the brass more than just pulling and reseating resulting in potentially inconsistent spring back. I’m for sure over thinking this for the intended use of the cartridge but it’s an interesting conversation to have with you all. I appreciate everyone’s input. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Bullet Pulling Question
Top