Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Brass Prep for 1X brass fired in different rifle
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Mike Matteson" data-source="post: 2531558" data-attributes="member: 101791"><p>If you have case fire from your rifle. 1. Just purchased case, first check the cases for overall case length to see if the case is out of spec, trimmer to length if needed. Use a comparator to check the dimension from the base to shoulder to see what the difference is. If shorter than your case that has been used in your firearm they should work with neck sizing, or wanted or use your FL die to size the cases where it's set at. (being short to should your die won't touch the shoulder. If you anneal case I would do that from the start after de-primer and cleaning. You don't fully knowing how many time those cases have really been fired. A mandrel setup would do the trick too for setting ID would very useful setting tension.</p></blockquote><p></p>
[QUOTE="Mike Matteson, post: 2531558, member: 101791"] If you have case fire from your rifle. 1. Just purchased case, first check the cases for overall case length to see if the case is out of spec, trimmer to length if needed. Use a comparator to check the dimension from the base to shoulder to see what the difference is. If shorter than your case that has been used in your firearm they should work with neck sizing, or wanted or use your FL die to size the cases where it's set at. (being short to should your die won't touch the shoulder. If you anneal case I would do that from the start after de-primer and cleaning. You don't fully knowing how many time those cases have really been fired. A mandrel setup would do the trick too for setting ID would very useful setting tension. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Brass Prep for 1X brass fired in different rifle
Top