Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Brass and bullet getting scrapes from loading in chamber
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="6.5x300 WBY" data-source="post: 1076746" data-attributes="member: 89150"><p>Sendero in 7mm mag loading a dummy round of new norma brass and 168 vld hunting bullet. COAL is 3.450</p><p></p><p>To me it seems that the feed ramp is scraping the brass pretty good and also the rail on where the bolt rides right next to the feed ramp there are 2 (one on each side) points that jut out a bit and both are pointy and sharp. Wondering and thinking they are making contact somewhere during loading.</p><p></p><p>thinking on breaking out the dremell to smooth out those points a bit but that feed ramp just seems sharp as the brass goes over it.</p><p></p><p>so what you think. </p><p></p><p>Break out the dremell or I am going to be sending out my barrel to get a brake installed and will have the smith check it out and smooth things out for me.</p><p></p><p>Thanks</p><p></p><p>Brian</p></blockquote><p></p>
[QUOTE="6.5x300 WBY, post: 1076746, member: 89150"] Sendero in 7mm mag loading a dummy round of new norma brass and 168 vld hunting bullet. COAL is 3.450 To me it seems that the feed ramp is scraping the brass pretty good and also the rail on where the bolt rides right next to the feed ramp there are 2 (one on each side) points that jut out a bit and both are pointy and sharp. Wondering and thinking they are making contact somewhere during loading. thinking on breaking out the dremell to smooth out those points a bit but that feed ramp just seems sharp as the brass goes over it. so what you think. Break out the dremell or I am going to be sending out my barrel to get a brake installed and will have the smith check it out and smooth things out for me. Thanks Brian [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Brass and bullet getting scrapes from loading in chamber
Top