Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Bolt needs fitting
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="BillLarson" data-source="post: 2718709" data-attributes="member: 1149"><p>I have a PTG Guided Reamer that cuts .705"...</p><p> if you have an oversize bolt which is what it sounds like This would solve bolt body problem....</p><p>However measure bolt diameter carefully...</p><p>On 700's the bolt guide surfaces front and back are not aligned and are different sized....</p><p>If it were mine.... I would straighten reciever out.Including front where barrel seats and the bolt raceway...and square up the reciever lugs...</p><p>By then your bolt would probably fit....I would also look at bolt carefully to make sure you have plenty of primary extraction... with respect to reciever ramp...</p></blockquote><p></p>
[QUOTE="BillLarson, post: 2718709, member: 1149"] I have a PTG Guided Reamer that cuts .705"... if you have an oversize bolt which is what it sounds like This would solve bolt body problem.... However measure bolt diameter carefully... On 700's the bolt guide surfaces front and back are not aligned and are different sized.... If it were mine.... I would straighten reciever out.Including front where barrel seats and the bolt raceway...and square up the reciever lugs... By then your bolt would probably fit....I would also look at bolt carefully to make sure you have plenty of primary extraction... with respect to reciever ramp... [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Bolt needs fitting
Top