Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Best Neck Turning Tool
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Trickymissfit" data-source="post: 433301" data-attributes="member: 25383"><p>that is similar to the Sinclair, but it allows you to shift the cutter in as small an increment as you want. The problem with these are that they cannot account for any neck runout compaired to the case body, so if you have .0003" TIR runout, you have .0006 when your done. On the otherhand if you locate off the case body itself, and then cut the neck you should come up with a more concentric case. An even better way would be to ream the necks, and then shave the necks. All off of a case holder mimicing the chamber itself.</p><p> </p><p>A pin mic is much better than a ball mic because the ball only measures a small area, while a pin measures a much larger area of the neck. I built and gave them away ten years before Fred stole the design, and they know it. If you have a drill press and a band saw you can build your own without too much trouble. You can buy the micrometer heads from ENCO as well as a .218" gauge pin and .218" reamer. The micrometer heads come threaded or press fit. I used the press fit version as I had a couple laying around (I used 1" travel heads, but they also make 1/2" travel heads as well)</p><p> </p><p>The only real inovators I ever saw in the shooting world was Homer Culver & Ferris Pendel. The rest are simply followers</p><p>gary</p></blockquote><p></p>
[QUOTE="Trickymissfit, post: 433301, member: 25383"] that is similar to the Sinclair, but it allows you to shift the cutter in as small an increment as you want. The problem with these are that they cannot account for any neck runout compaired to the case body, so if you have .0003" TIR runout, you have .0006 when your done. On the otherhand if you locate off the case body itself, and then cut the neck you should come up with a more concentric case. An even better way would be to ream the necks, and then shave the necks. All off of a case holder mimicing the chamber itself. A pin mic is much better than a ball mic because the ball only measures a small area, while a pin measures a much larger area of the neck. I built and gave them away ten years before Fred stole the design, and they know it. If you have a drill press and a band saw you can build your own without too much trouble. You can buy the micrometer heads from ENCO as well as a .218" gauge pin and .218" reamer. The micrometer heads come threaded or press fit. I used the press fit version as I had a couple laying around (I used 1" travel heads, but they also make 1/2" travel heads as well) The only real inovators I ever saw in the shooting world was Homer Culver & Ferris Pendel. The rest are simply followers gary [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Best Neck Turning Tool
Top