Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Berger Meplats - Improved Uniformity
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="elkaholic" data-source="post: 1065757" data-attributes="member: 13833"><p>I use a ceramic block with holes drilled in it so that just the tips stick out. This helps insulate the jacket (lead) below where you want it annealed. Boiling lead is not good and the bullets should not be moved right away after annealing. I would not attempt to anneal bullets with less than 1/4" hollow point. Usually just drilling out the tips with a .040"-.050" bit is sufficient anyway.....Rich</p></blockquote><p></p>
[QUOTE="elkaholic, post: 1065757, member: 13833"] I use a ceramic block with holes drilled in it so that just the tips stick out. This helps insulate the jacket (lead) below where you want it annealed. Boiling lead is not good and the bullets should not be moved right away after annealing. I would not attempt to anneal bullets with less than 1/4" hollow point. Usually just drilling out the tips with a .040"-.050" bit is sufficient anyway.....Rich [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Berger Meplats - Improved Uniformity
Top