Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Belted Magnum Collet Resizing Die
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Okanogan" data-source="post: 1692029" data-attributes="member: 90397"><p>My thought run similar to those of MagnumManiac. I have had the LarryWillis collet die for more than 5 years and have not found occasion to use it. I've been through more than 2000 reloads for my 300 WMs over the last several years and never run into the problem the collet was designed for. I use Redding Competition body die and bushing die and try to set them up carefully to minimize resizing. I also try not to switch brass between rifles even though the chamber dimensions are very close (all from the same gun smith).</p><p>Most of what I have shot has been Norma brass with heavy loads. I have the ability to anneal necks but haven't done it often. My experience has been primer pockets loosening up after 5-10 loads has been the demise of my brass.</p><p>I am not knocking the collet die or saying anything bad about, just has been one of those things I bought that sits in a bin somewhere,</p></blockquote><p></p>
[QUOTE="Okanogan, post: 1692029, member: 90397"] My thought run similar to those of MagnumManiac. I have had the LarryWillis collet die for more than 5 years and have not found occasion to use it. I've been through more than 2000 reloads for my 300 WMs over the last several years and never run into the problem the collet was designed for. I use Redding Competition body die and bushing die and try to set them up carefully to minimize resizing. I also try not to switch brass between rifles even though the chamber dimensions are very close (all from the same gun smith). Most of what I have shot has been Norma brass with heavy loads. I have the ability to anneal necks but haven't done it often. My experience has been primer pockets loosening up after 5-10 loads has been the demise of my brass. I am not knocking the collet die or saying anything bad about, just has been one of those things I bought that sits in a bin somewhere, [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Belted Magnum Collet Resizing Die
Top