Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Bedding a Bell and Carlson Medalist for Weatherby Mark V
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Dr. Vette" data-source="post: 616425" data-attributes="member: 22335"><p>Did you look at the action in the stock from below through the magazine as I'd recommended? It's easiest if the bottom metal is off and the magazine is out. If you see space between the action and the stock you can either a) sand out the barrel channel to float the barrel (and I suspect you'll have to take out a lot more than just the pressure pads) or b) call Bell & Carlson and exchange it for one that is made correctly.</p><p> </p><p>The B&C will likely have more side-to-side play in it than a factory plastic stock. That can be improved with some bedding if you wish. It's the up-and-down that will get you as well as the front-to-back.</p></blockquote><p></p>
[QUOTE="Dr. Vette, post: 616425, member: 22335"] Did you look at the action in the stock from below through the magazine as I'd recommended? It's easiest if the bottom metal is off and the magazine is out. If you see space between the action and the stock you can either a) sand out the barrel channel to float the barrel (and I suspect you'll have to take out a lot more than just the pressure pads) or b) call Bell & Carlson and exchange it for one that is made correctly. The B&C will likely have more side-to-side play in it than a factory plastic stock. That can be improved with some bedding if you wish. It's the up-and-down that will get you as well as the front-to-back. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Bedding a Bell and Carlson Medalist for Weatherby Mark V
Top